This is the electronic version Wega Polaris 2 group EVD model with a built in microprocessor controlling all operations, and providing volumetric dosages for coffee brewing.
The programming of 4 different doses per group head, automatically and independently.
Programmable hot water. Push buttons for manual continuous coffee brewing. Automatic water re-fill & auto level.
This is the preferred machine of Di Bella Coffee cafes.
*ALSO AVAILABLE IN ALTERNATE COLOURS* - Please contact us to discuss further.
Below is a full listing of requirements for bench space, power and plumbing:
MACHINE DIMENSIONS Width 740 mm Depth 570 mm Height 520 mm
ELECTRICAL Machine is 20AMP *Single Phase
PLUMBING REQUIRMENTS Water inlet with stopcock valve and 350kpa pressure limiting valve. Placed underneath the coffee machine. Water outlet with waste tongue dish.
GENERAL REQUIRMENTS The recommended bench should be approximately 2500mm long, be between 850mm to 950mm deep and approximately 850mm to 900mm high to allow coffee making in front of machine comfortably.
We also recommend grinder power points to be located underneath machine – with a hole 70mm wide to accommodate leads. The 65-75mm hole is generally made under where the coffee machine will be placed.
Flat Rate of $12.50 deliveryFREE Delivery when you spend over $50